1 / 3
Vacuum Pump Holder for Skadis Pegboards
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple holder for common cheap vacuum pumps which come with vacuum filament bags
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 1
- Wyświetlenia
- 88
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Share Alike
A simple little curved holder for cheap battery powered vacuum pumps which come with vacuum filament bags.
Features include:
- 5 built-in pegs of relatively strong design.
- Slanted flat base for easy print with reduced material.
- Curved holder to specifically fit the diameter of the pump, without it rubbing against the wall or anything.
Typically I print with 10% infill, but I'd set a modified for the pegs to 100% infill to make them strong. I printed on the long flat base side, with tree supports for the pegs.