Guitar String Nut (Holder/Raiser)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guitar String Saddle for Classical Guitar. Dimensions: 47mm x 6mm Adjust it to your Guitars size!
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 330
- Wydruki
- 1
- Wyświetlenia
- 1025
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
As the String Saddle for my Classic Guitar broke down over the years, and replacement parts are stupid expensive, I designed this replacement part, which worked great on my guitar, though might eventually be a little off on others. So in Prusa Slicer you may have to eventually scale it to your needs.
Dimensions: 47mm x 6mm
Material: PLA (in your favorite color)
To save material it is a hollow design, but still remains very stable.
As Print time is quite low for this small part, I would recommend going for detailed settings to get a quality looking part.
For the Counter Part on the bottom of the Guitar I also designed a raiser, so watch my other uploads if you're interested for that! (Makes sense to also replace if you changed colors)
If this helped you out and eventually saved you some bucks, maybe consider leaving a like. I appreciate your support!
PS: I'd also love to see some of your results!