1 / 3
X-Shot Motorized Piston Pump Barrel Shroud (Tactical) — zdjęcie 1
1 / 3

X-Shot Motorized Piston Pump Barrel Shroud (Tactical)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Turn your Piston Pump into a Spec Ops dream with this dual-railed, sleek looking, 9 inch long barrel!

Ocena
0 / 5
Polubienia
24
Pobrania
38
Wydruki
0
Wyświetlenia
586
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Pair this barrel with Bruce LeedleLeedleLeedleLee's foregrip, Gabe's BCAR cover, and N8thin's stock to make a truly unique and military looking Piston Pump! I'd print the pins at a scale of 99% just to give them some more room to slide into the rail holes. 

Assembly:

Put little daps of superglue of any kind into the rail holes before inserting the 4 pins into the rails. Align the longer rail with the top two holes and the shorter rail with the bottom two holes. Apply any superglue (if wanted for more support) to the bottom of the rails and push the rails until they snap in place. Finally, slide the barrel onto the cullet of the Piston Pump (some tape may be necessary for more friction) and put whatever foregrip you want onto it to complete your look! 

Tagi