Inclined Gridfinity 6/12/18 Bits holder for 6/6.35/8mm bits
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for 6/6.35/8mm milling bits stored inclined
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
My drawers are just 90mm deep, while some bits are almost 100mm, and can't be stored vertically. This bins allow storing milling bits inclined, so that it fits vertical constraint.
There are 3 bin sizes available:
- 1x2 for 6 bits
- 2x2 for 12 bits
- 2x3 for 18 bits
Each variant is available for 6mm, 6.35mm (¼"), and 8mm bits.
Note: long bits placed in the farmost holes may take some space on a gridfinity row behind. Heavy bits may also overturn the bin, so there is a good idea to fill the bin starting with the nearest holes.
Source (feel free to adjust/improve): https://cad.onshape.com/documents/9e6714fa1191c4651a535d2f/w/e4b7dafbed89ba16dac207e8/e/4fc52fba4238edca58264010