1 / 2
Tripod Adapter for 10 W COB LED Rechargeable Work Light
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attaches your work light to a camera tripod
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
This part attaches to your LED Work light to allow it to be attached to a camera tripod.
Designed for Berg 10W Work light, a rebranded generic Made in China model.
The following should also fit:
- Emos P4533
- Megatron Helfa M 10W 600lm MT69052
- Nortech 9800R LED Work Light
- Nortech 9800Y
- litezall 1000 lumen worklight
- Draper
- Workzone
You get the point, I could list a million more.
Shame on these companies…
What you need
- Two M3 x 16 mm screws or similar length (affix the part to the worklight)
- One UNC ¼ " nut to attach to tripod screw (which is a UNC ¼ ‘’ screw, would you believe it?)
- Two M3 nuts (You will get these from the work light during assembly, REUSE THEM)
Assembly
See the included GIF/video on detailed assembly.
Printing
I printed it out of ABS, 4 walls, 15% gyroid infill. I advice against using PLA, due to its low impact toughness, and tendency to creep under stress.
Print in the orientation below
