1 / 2
Helikon-Tex Traveler Chair foot v1 — zdjęcie 1
1 / 2

Helikon-Tex Traveler Chair foot v1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My recreation of the original Helikon-Tex Traveler chair foot, that i lost.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
70
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Lost a foot cap from my Helikon-Tex Traveler Chair. Made this cap to replace it.

Inner diameter is 16.10mm and fits my chair pretty snug (can-be-removed-with-two-hands kind of snug).
If this does not fit your chair, quite that good, I recommend adjusting inner diameter in .05mm increments and print a few to see for fit. 

Uploaded .stl & 3mf file (that i assume includes my slice settings). 

For fit testing i printed them 15% infill 2 perimeters.

For heavy duty use, final product i printed it:
5 perimeters
Solid layers top: 6
Solid layers bottom: 6
Infill 50% Gyroid
Supports needed: Yes (supports remove with a screwdriver or pliers easily and consistantly.
PLA

Works fine, allthough i usually dont use it on concrete and other hard materials (camping chair :) )

Hope this helps you fix the same problem.



 

Tagi