Helikon-Tex Traveler Chair foot v1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My recreation of the original Helikon-Tex Traveler chair foot, that i lost.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 70
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Lost a foot cap from my Helikon-Tex Traveler Chair. Made this cap to replace it.
Inner diameter is 16.10mm and fits my chair pretty snug (can-be-removed-with-two-hands kind of snug).
If this does not fit your chair, quite that good, I recommend adjusting inner diameter in .05mm increments and print a few to see for fit.
Uploaded .stl & 3mf file (that i assume includes my slice settings).
For fit testing i printed them 15% infill 2 perimeters.
For heavy duty use, final product i printed it:
5 perimeters
Solid layers top: 6
Solid layers bottom: 6
Infill 50% Gyroid
Supports needed: Yes (supports remove with a screwdriver or pliers easily and consistantly.
PLA
Works fine, allthough i usually dont use it on concrete and other hard materials (camping chair :) )
Hope this helps you fix the same problem.
