1 / 3
Soft Bumper for Sliding Glass Shower Door — zdjęcie 1
1 / 3

Soft Bumper for Sliding Glass Shower Door

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A better glass shower door bumper. No more loud clunk!

Ocena
0 / 5
Polubienia
4
Pobrania
11
Wydruki
0
Wyświetlenia
84
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The original shower door rubber bumpers are awful and make a loud clunk if you accidentally close the doors too hard. These TPU bumpers absorb an accidental hard close without waking up your partner :)

These bumpers are designed to fit a particular extruded aluminum frame. See photo of the frame dimensions to determine if they will fit your shower door.

Print conditions

  • Must print in TPU (duh)
  • 2 perimeters

There are 3 versions of bumpers: original, short and tall. My 6mm thick glass doors work well with 2 “original” height bumpers printed from shore hardness 95A TPU. If your doors are significantly heavier, or if your TPU is more flexible, then you may want 2-3 tall bumpers. And vice versa. Height was changed by 25% to make the short and tall versions.

Tagi