1 / 3
Slop Sink Washer Waste Water Diverter — zdjęcie 1
1 / 3

Slop Sink Washer Waste Water Diverter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is to split the washing machine waste water between both sides of a slop sink.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
56
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I was having a problem that the outflow hose from the washer was overfilling one side of the sink. The drain pathways for the sink are pretty confined so it slows the flow of effluent into the drain pipe below.  The diverter divides the flow between both halves and it also allows for a mesh strainer to be added to the end pipes. NOTE…the model is closed on the top, the support interface material that i used ended up breaking off the top layer. It is still functional this way. 

The OD of the input pipe is 1.75 so the hose ID needs to be 1.75".

Tagi