1 / 3
LEGO RC CAR 5599 / 5600 REPLACMENT GEARS
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
replacment gears for lego rc car 5599 / 5600
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a full replacment gear set for the lego rc car 5599 / 5600. You have to replace all gears if one of the original gears is broken. The gears are designed with a 0.6 standard gear module. I could not quite match it to the LEGO gears, they are a bit strange in design.
I can recommend to print the gears with a 0.2 or 0.25 nozzle and a 0.1 layer heigth. Best material would be nylon, but petg, pctg or pc should be fine too.
Use a 3mm drill for the single gears and a 2mm drill for the switchable gear if the holes do not fit after printing.