1 / 2
Garage door Handle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a handle to lift the garage door when the opener is disconnected. This handle is designed for a Wayne Dalton
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution
I needed a garage door handle to help me lift the door when the opener was disconnected. I got tired of grabbing the metal ribs. This handle is designed to be used with #14 or ¼ sheet metal screws. I used the washerhead hex screws to match the others on the door. It was installed in the pre laid out holes so if it doesn't match you can stretch the model as needed. I printed it on its side with organic supports for the screw holes.