1 / 2
Prusa CORE One - Print Sheet Holder (20x10x2mm magnets) — zdjęcie 1
1 / 2

Prusa CORE One - Print Sheet Holder (20x10x2mm magnets)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Storage for Prusa CORE One print sheets.

Ocena
0 / 5
Polubienia
12
Pobrania
59
Wydruki
0
Wyświetlenia
514
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Hello all,

This is a remix of @DominikValecek_94673's excellent and minimalist design for a print sheet holder (build plate holder). This is rather similar to Dominik Valeček's design, but with 20 x 10 x 2mm magnets.

I printed this with Prusament orange PETG, balanced 0.2 profile, with 15% gyroid infill, and snug style support on my Prusa CORE One. The magnet holes are purposely loose, which as a result means you must glue in your magnets after printing.

Thanks for the interest in this model and make sure you show some love to the original design as well! :)

Tagi