1 / 2
Prusa CORE One - Print Sheet Holder (20x10x2mm magnets)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Storage for Prusa CORE One print sheets.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 59
- Makes
- 0
- Views
- 514
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Hello all,
This is a remix of @DominikValecek_94673's excellent and minimalist design for a print sheet holder (build plate holder). This is rather similar to Dominik Valeček's design, but with 20 x 10 x 2mm magnets.
I printed this with Prusament orange PETG, balanced 0.2 profile, with 15% gyroid infill, and snug style support on my Prusa CORE One. The magnet holes are purposely loose, which as a result means you must glue in your magnets after printing.
Thanks for the interest in this model and make sure you show some love to the original design as well! :)