Alternative Battery Mounts [Hachidorii Frames]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternative ≈0.1g TPU battery mounts for the Hachidorii XS and V2. Made to fit 300 - 550 mAh stick-type batteries.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an alternative to the old TPU battery strap that was used on the original Hachidorii V2. This option is lighter and easier to attach to the frame but will probably stretch out over time and wear - luckily it's easy to print and remount.
Take note that the Hachidorii V2 has its own variants, while the XS and future variants will use the “For Other Hachidorii Frames”. Also note that the strap goes on top of the frame - under the M2 nylon nut or the AIO grommets (see photos for reference). If you choose to use these alternative battery straps, also add two 0.6mm spacers on the adjacent M2 nylon screws to allow the AIO to sit flat. All STL and STEP files are available incase anyone wants to make adjustments or mount a battery with different dimensions.
Lastly, I find it's best to flatten the head of the M2 nylon screws to give the batteries something to press up against without making a dent on them. You can do this with the included “M2 Nylon Screw Head Cutter”.