Victorian style Picture Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Victorian Style Picture Frame made in Blender for 3D Printing. Modelled 10 March 2022.
- Ocena
- 4,929 / 5
- Polubienia
- 709
- Pobrania
- 3044
- Wydruki
- 14
- Wyświetlenia
- 10 888
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Victorian Style Picture Frame, it was made for the PrusaPrinters 3D Contest.
I thought about what kind of Frame i would like to print and something came in my mind.
This Frame is a very detailed and big print with a lot of verticies. Because of that it is a Challenge to print. While Modeling i always tried the Prusa Slicer out to see if any Problems arise. While Modeling many problems arose while using the slicer because of messed up typologie. But This Version should hold up. I tried the stls many times in the Slicer and everything worked when i pressed slicing.
The Object is big and the thinner your layer height the longer the print will take with 20mm thickness it takes about 12h 57min in running time, with 7mm 1d14h30min
Warning: It is a detailed print and may not work when you got warping issues. With warping the print will not look good because of the many flourishes.
Good Luck Printing and have fun :D