Desiccant spool holder for filaments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An ergonomic silica (desiccant) storage to keep your filament actually dry
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 206
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Why?
A whole lot of people like to put desiccant in a small cylinder box fitted inside the filament spool core, then put everything in a vacuum bag and hope for the best. For sure, one adds a sensor directly on silica and enjoys “super low humidity”, even though the filament itself is separated from the desiccant with the spool, and the humidity in that air pocket is actually much higher.
This model is a take on one more “universal” desiccant holder to be fitted directly on the filament on the spool side. The shape and size allow for good compatibility with different types of spools and any amount of filament left on them.
Features
- High compatibility with most spools. The box is 52 mm tall, meaning it can fit even a bit of non-standard spools narrower than 60 mm
- “Thin” design to increase the surface area instead of increasing the volume
- Easy friction-based closing mechanism for the cap
How to print:
- PLA / PETG / anything
- 0.2 mm layer or smaller
- No supports
A short video presentation
Free for personal use
This model is free for personal use.
For commercial usage (meaning if you want to sell it), please contact me - we can think of something. Any commercial usage without an arrangement is forbidden