Cupid's Airship of Love

Printing Details

Filaments & Settings:

• Balloon Canopy: CR-PLA Silk Gold (using default Creality Print presets)
• Rose & Cupids: Duo-Silk Red-Gold Sunlu (increase the nozzle temperature by +10°C compared to the CR-PLA Silk preset)
• Platform/Base: Ultra Speed PLA Gold (using default Creality Print presets)
• Sticks : Ultra Speed PLA Black (using default Creality Print presets)
• Cupids : TPU 

Infill:

• 10% for all parts except the four black pillars, which should be printed at 20% infill for added stability

Supports:

• Only required for the top of the balloon canopy

Bed Adhesion & Cooling:

• Use default settings for PLA filament. Ensure your bed is level and clean for optimal first-layer adhesion :) .

• Mandatory :
  Top canopy
• Middle canopy
• Bottom Canopy
• Basket
• 4 sticks

Not mandatory :

• Big flower in the basket (can be replaced)
• Support + Top support + 2 Small flowers
• Cupids in TPU

Assembly Instructions

• Prepare Printed Parts:
  • Allow each part to cool completely before removing it from the build plate to avoid warping or damage. (especially the top of the canopy !)
  • Reminder : Sand the contact areas to ensure that all parts fit together smoothly and securely (especially between the bottom and the middle of the canopy)
• Align and Fit:
  • The balloon canopy features small lips and grooves to help you position it accurately on the pillars.
  • If you choose to use glue, apply it to the top ends of the pillars so they bond with the underside of the canopy (rather than the basket) for a cleaner look and better stability.
• Add Roses and Cupids:
  • Attach the decorative rose and cupid figures to their designated spots for a truly romantic flair.
  • Suggestion: Paint the cupids directly onto the surface of the balloon canopy using semi-transparent red nail polish. This adds contrast and enhances their visibility, giving them a delicate and vibrant appearance. (You can also cut and stick a peace of paper but I didn't try this method)
• Optional LEDs:
  • To elevate the design, consider placing LED lights inside the balloon. The silk filaments will diffuse the glow beautifully, creating a warm and enchanting ambiance. <3 

Tips for Best Results

• Precision Assembly:
  • After sanding the contact areas, ensure that all parts fit snugly to maintain the structural integrity of the model. This will also enhance the overall appearance.
• Bed Adhesion:
  • Ensure good bed adhesion to prevent any shifting or detachment of thin parts like the pillars.

Surface Finishing:

• Painting Cupids: Use semi-transparent red nail polish to paint the cupids directly onto the balloon canopy. This not only adds contrast but also allows for greater customization. Use fine brushes to achieve detailed and clean lines, ensuring the colors remain vibrant and elegant. 
• Or Printing cupids : Print them with TPU and glue them (need some precise work too ! :). In my opinion, it's even a bit harder than painting with a fine brush)

Need a customized version ? Feel free to ask !