Pixel 8 Nillkin Case Lens Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Lens Cover for the Google Pixel 8 Nillkin Phone Case
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Over the time the camera lens cover from my Nillkin Case for my Google Pixel 8 came loose. I only found a model for the S21, so I designed this on my own.
After several iterations I found values that fit really well.
I added my FreeCAD file so you can adapt the model for your phone model's case.
Print settings
- Layer height: 0.2 mm
- Nozzle: 0.4 mm
- all layers either top or bottom layers (e.g. Top shell layers: 11) to avoid infill
- Top surface pattern: Hilbert Curve (this is a matter of taste but hilbert curve provides a nice grip
- Material: I printed mine in PETG, but it should work with any material
- If you desire, you can enable fuzzy skin just for the top three layers (the three lines)
Installation
When you remove your phone from the case, you can pop out the old lens cover (gently push against the cover from the inside of the case).
Installing the new lens cover is a little tricky. I found it works best when you slightly bend the case and the lens cover itself so that the rails just fit inside.