1 / 2
Sunlu Dryer Mount for Printing TPU & FPLA on AnyCubic Kobra 3 — zdjęcie 1
1 / 2

Sunlu Dryer Mount for Printing TPU & FPLA on AnyCubic Kobra 3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Includes all the files to build your own setup just like mine. Includes SolidWorks Assembly File!

Ocena
0 / 5
Polubienia
3
Pobrania
12
Wydruki
0
Wyświetlenia
207
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I needed a way to better print TPU and FPLA on my AnyCubic Kobra 3 3D Printer. This design was made in a way that it disassembles easily letting you get back to printing with the traditional ACE setup when you are done. My Goal has been to make things easier to do with my AnyCubic and these printers can handle printing these materials with the right setups. 

FPLA FIlament Settings Suggested by Grok

Nozzle temp: 220–225 °C <<< Upper range and a little higher than Atariaxia Art suggests. 
Bed temp: 50–55 °C (first layer 55, rest 50) <<< Really Important

Brim – Optional if not sticking enough.

Please read my article about this design for more information: Printing FPLA on AnyCubic Kobra 3

Donations Appreciated: https://www.buymeacoffee.com/deskmouse

Sunlu Dryer: https://a.co/d/19WbFkO 

Tagi