Sunlu Dryer Mount for Printing TPU & FPLA on AnyCubic Kobra 3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Includes all the files to build your own setup just like mine. Includes SolidWorks Assembly File!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 207
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
I needed a way to better print TPU and FPLA on my AnyCubic Kobra 3 3D Printer. This design was made in a way that it disassembles easily letting you get back to printing with the traditional ACE setup when you are done. My Goal has been to make things easier to do with my AnyCubic and these printers can handle printing these materials with the right setups.
FPLA FIlament Settings Suggested by Grok
Nozzle temp: 220–225 °C <<< Upper range and a little higher than Atariaxia Art suggests.
Bed temp: 50–55 °C (first layer 55, rest 50) <<< Really Important
Brim – Optional if not sticking enough.
Please read my article about this design for more information: Printing FPLA on AnyCubic Kobra 3
Donations Appreciated: https://www.buymeacoffee.com/deskmouse
Sunlu Dryer: https://a.co/d/19WbFkO