1 / 2
nPM1300 EK and nPM Fuel Gauge Board case — zdjęcie 1
1 / 2

nPM1300 EK and nPM Fuel Gauge Board case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Case to hold a Nordic nPM1300 evaluation kit and Fuel Gauge Board

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
31
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Public Domain

The Nordic nPM1300 evaluation kit connects to the Fuel Gauge Board through a set of horizontal pin headers. The connection between the two felt rather flimsy, so I made this case to prevent the connection from turning into a hinge and breaking the headers off.

Required hardware:

PartQuantity
Soldering iron 
M3 x 3mm heat set inserts8
M3 x 4mm or 5 mm screws8
M3 washer (optional)8

Assembly Instructions:

  1. Use a soldering iron to push the heat set inserts into the eight holes in the top of the case. 
  2. Connect the nPM1300 EK and Fuel Gauge Board together.
  3. Rotate the assembly so the mounting holes line up with the heat set inserts and place it into the case.
  4. Secure it with eight screws. Optionally add a washer to each screw to protect the PCB from the screw head.

Tagi