1 / 2
nPM1300 EK and nPM Fuel Gauge Board case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case to hold a Nordic nPM1300 evaluation kit and Fuel Gauge Board
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
The Nordic nPM1300 evaluation kit connects to the Fuel Gauge Board through a set of horizontal pin headers. The connection between the two felt rather flimsy, so I made this case to prevent the connection from turning into a hinge and breaking the headers off.
Required hardware:
| Part | Quantity |
| Soldering iron | |
| M3 x 3mm heat set inserts | 8 |
| M3 x 4mm or 5 mm screws | 8 |
| M3 washer (optional) | 8 |
Assembly Instructions:
- Use a soldering iron to push the heat set inserts into the eight holes in the top of the case.
- Connect the nPM1300 EK and Fuel Gauge Board together.
- Rotate the assembly so the mounting holes line up with the heat set inserts and place it into the case.
- Secure it with eight screws. Optionally add a washer to each screw to protect the PCB from the screw head.
