1 / 7
Fence Post Lamp Light 60*60mm and 80*80mm — zdjęcie 1
1 / 7

Fence Post Lamp Light 60*60mm and 80*80mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lamp to insert into a fence post instead of a cap

Ocena
0 / 5
Polubienia
3
Pobrania
11
Wydruki
0
Wyświetlenia
96
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Basically this is an endcap for a fence post, that can be turned into a lamp.
How? - That's for you to decide.

You need transparent filament (Preferably PETG, maybe), or maybe white will do as well.

To achieve the same look:

  1. Add fuzzy skin on outer walls
  2. Switch to transparent/white filament after the “Base” switches into thin walls.
  3. Probably it's better to paint the “Cap” with white paint or glue a foil to its inside side.

I wanted to control it in Home Assistant so I glued a small part of a LED strip to aluminum profile (Just to be sure it won't overheat). Then soldered an ESP32 dev board using a mosfet to control the LED. Like this:

The tube is a cutoff from 40mm sewer pipe.

P.S. If you need different size - ask about it, maybe I can do something.

Tagi