1 / 7
Fence Post Lamp Light 60*60mm and 80*80mm — image 1
1 / 7

Fence Post Lamp Light 60*60mm and 80*80mm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Lamp to insert into a fence post instead of a cap

Rating
0 / 5
Likes
3
Downloads
11
Makes
0
Views
98
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Basically this is an endcap for a fence post, that can be turned into a lamp.
How? - That's for you to decide.

You need transparent filament (Preferably PETG, maybe), or maybe white will do as well.

To achieve the same look:

  1. Add fuzzy skin on outer walls
  2. Switch to transparent/white filament after the “Base” switches into thin walls.
  3. Probably it's better to paint the “Cap” with white paint or glue a foil to its inside side.

I wanted to control it in Home Assistant so I glued a small part of a LED strip to aluminum profile (Just to be sure it won't overheat). Then soldered an ESP32 dev board using a mosfet to control the LED. Like this:

The tube is a cutoff from 40mm sewer pipe.

P.S. If you need different size - ask about it, maybe I can do something.

Tags