IKEA HAUGA Night Stand Cable Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Must print in PETG, or similar material. It bends too much during installation for PLA.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Keep your cables organized and out of sight with this cable holder designed specifically for the IKEA HAUGA Night Stand. The clip installs easily and securely, tucking into the holes on either side of the night stand back and holding cables neatly in place.
Installation:
- Tuck the curved section of the clip into the hole on either side of the night stand back.
- Rotate the top of the clip into place.
- Place your cable in the holder.
Material Recommendation:
Print in PETG. PLA is not recommended, as it bends too much during installation and will crack.
--
Support my work:
PayPal Donation: https://www.paypal.me/disizitstudios
Cults 3D: https://cults3d.com/en/users/ItsFilamental/3d-models