Micron (R1) Rear Cover entry for SFS v2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Place your SFS v2.0 directly on the rear cover entry!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
While my previous corner mount for the BTT SFS v2.0 worked perfectly, I wanted to try reducing the added filament path required, and what better place than putting it right at the rear entry of the PTFE tube into the chamber?
The design was created in such a way that part of the SFS device is “embedded” into the rear cover without blocking access to the manual lever to open the filament path. The device is also held in place with screws that secure it to a plate, which is mechanically locked on the cover and prevents it from falling. The SFS output PTFE M10 coupler also perfectly fits into the original interior accent cover.