1 / 7
Micron (R1) Rear Cover entry for SFS v2.0 — image 1
1 / 7

Micron (R1) Rear Cover entry for SFS v2.0

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Place your SFS v2.0 directly on the rear cover entry!

Rating
0 / 5
Likes
7
Downloads
9
Makes
0
Views
105
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

While my previous corner mount for the BTT SFS v2.0 worked perfectly, I wanted to try reducing the added filament path required, and what better place than putting it right at the rear entry of the PTFE tube into the chamber?

The design was created in such a way that part of the SFS device is “embedded” into the rear cover without blocking access to the manual lever to open the filament path. The device is also held in place with screws that secure it to a plate, which is mechanically locked on the cover and prevents it from falling. The SFS output PTFE M10 coupler also perfectly fits into the original interior accent cover.

Tags