1 / 2
Creality K1 K1C XY Belt Tensioners Upgrade Left Plate for CFS — zdjęcie 1
1 / 2

Creality K1 K1C XY Belt Tensioners Upgrade Left Plate for CFS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified the Henlor's original Left Belt Tensioner to support CFS cutter and not interfere with the original thumb screw

Ocena
0 / 5
Polubienia
37
Pobrania
134
Wydruki
0
Wyświetlenia
1083
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Description
As per Henlor's original design, This upgrade goal is the prevent the tensioner form tilting by containing it more on the Z and X axes while also working with the Creality CFS upgrade. This will prevent the belt to wear unevenly and increase its life spend and allow the cutter to properly function on a CFS enabled K1 or K1C.

Assembly
This is a 2-piece design. Please GLUE the 2 pieces together. This was primarily done to retain a beautiful surface texture throughout the piece.

Notes
DO NOT piece together with rubber glues, sponge tapes, or any adhesives that provide squish. Squish is BAD. Any squish can cause the CFS cutter to fail to cut.

Tagi