Weatherproof 2x AAA Battery storage case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This small case is meant for 2x AAA battery, so you can lug them around safely while in the woods or at the range.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 671
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This small case is meant for 2x AAA battery, so you can lug them around safely while in the woods or at the range. I initially designed this to carry around some spare batteries for my active hearing protection while at the range. Uses a single M3 nut inserted in the middle of the print to tighten all parts together and to make a better seal.
Print the base bottom-down and the cap top-down to get a nice finish. No supports required.
The “TPU gasket” should be printed from a flexible material, or you can substitute it with your own gasket material. It's supposed to sit tight in the recess of the base, and might be tricky to position there.
! Remember to pause the print using a macro or modified g-code to insert the M3 nut into the print !