1 / 4
Steel Sheet Holder - Magnets Holder for Secure storage & Satisfying click! 2-4Layers — zdjęcie 1
1 / 4

Steel Sheet Holder - Magnets Holder for Secure storage & Satisfying click! 2-4Layers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnets Holder for "Expandable Sheet Holder", Incl. files for 2,3,4 layers. Easy to install. Satisfying "Click" sound.

Ocena
5 / 5
Polubienia
17
Pobrania
41
Wydruki
0
Wyświetlenia
269
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Magnets Holder for the  “Expandable Steel Sheet Holder”

Works for both MK and MINI variants. 

Key Feature

  • Easy installation: same as the sheet holder, find the right spot and screw it in place.
  • Secure storage: uses Ø8×10mm magnets, tight fit with no glue needed, never fall off by accident.
  • Fit your need: STL file for 2,3,4 layers provided, editable STEP & F3D for Fusion360 also include.
  • Satisfying: Nothing is better than a “CLICK!” sound when storing your steal sheet!!! Also, to provide a steady resistance when pushing the button.

                        Click~!

                      Full operation

Make Guide

  1. Print the holder with any material except flexible or semi-flexible one (do not use PA6/66 for it tend to deform under constant load).
  2. Insert the magnets using pliers (water pump pliers works best).
  3. Insert steel sheet into the sheet holder, place a thick piece of paper between back-end of steel sheet and the magnet holder, make sure the steel sheet goes all the way to the end, and the magnet holder is push against the steel sheet, then attachment of the holder.
  4. Step 3 is CRUCIAL for the best result, we want the magnet holder to be as close to the steel sheet as possible, while keeping a little air-gap between them, in order to prevent the coalition breaking the magnet or vice versa. 

 

DO NOT SKIP STEP 3 ⚠

Happy printing, and may the freedom be with you.

 

Tagi