1 / 7
Nerf Pro Sender "Atlas" Bodykit and Folding Stock — zdjęcie 1
1 / 7

Nerf Pro Sender "Atlas" Bodykit and Folding Stock

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Changes the ugliest flywheel nerf blaster into a folding stock flywheel bullpup rifle. Inspired by the MPP Atlas Shroud

Ocena
0 / 5
Polubienia
26
Pobrania
69
Wydruki
1
Wyświetlenia
598
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The first modern half dart nerf blaster i bought on a whim was a Nerf Pro Sender on sale at Walmart. Thing hit so much harder than my childhood nerf blasters I was intrigued. Found it online on fire sale for $14. I've since built a dozen 3d printed blasters and forgot about the Sender. Thing was so ugly I shoved it under a guest room bed. 
 

Found it the other day and couldn't find any mods other than the Micron and I love the Atlas SRS shroud for the Xshot Piston Pump and it lines up with the body better than expected. Decided to make a Frankenstein's monster of a remix using Trimble Sketchup. Added a shortened version of Brooklyn Tony's Aeon Pro X folding stock with two length options. It came out better than expected so I present my 2 day project to make the Pro Sender less ugly.
 

EDIT 11-30-25: After further testing, the barrel is too long/tight for the darts to fly accurately. I've edited several springer files but never a flywheel blaster. I've adapted the files to expand the barrel to allow the darts to remain accurate


Basic assembly instructions at:

Atlas SRS Hand Guard for the xShot MPP
https://makerworld.com/en/models/1844886-atlas-srs-hand-guard-for-the-xshot-mpp#profileId-1971405

It'll friction fit pretty tight but needs the following to make it right:

  • 5 Heat Inserts: M3x6x4.2

  • 5 M3x12mm screws (cap head preferred)

Folding stock instructions and parts are the same as the folding stock in this kit:

APX-24 DMR Kit for the Adventure Force Aeon Pro X
https://www.printables.com/model/911946-apx-24-dmr-kit-for-the-adventure-force-aeon-pro-x

M3 Hex Nut

5

M5 Hex Nut

1

Other:

Part Description:

Quantity:

8mm Diameter Compression Spring

(Must be less than 5mm thick when fully compressed)

1

Zero Degree BCAR barrel option:

6x uxcell 693ZZ Deep Groove Ball Bearing Double Shield 693-2Z 2080093, 3mm x 8mm x 4mm Carbon Steel Bearings

6x M3 x 10mm 



 

Tagi