Nerf Pro Sender "Atlas" Bodykit and Folding Stock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Changes the ugliest flywheel nerf blaster into a folding stock flywheel bullpup rifle. Inspired by the MPP Atlas Shroud
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 69
- Makes
- 1
- Views
- 598
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The first modern half dart nerf blaster i bought on a whim was a Nerf Pro Sender on sale at Walmart. Thing hit so much harder than my childhood nerf blasters I was intrigued. Found it online on fire sale for $14. I've since built a dozen 3d printed blasters and forgot about the Sender. Thing was so ugly I shoved it under a guest room bed.
Found it the other day and couldn't find any mods other than the Micron and I love the Atlas SRS shroud for the Xshot Piston Pump and it lines up with the body better than expected. Decided to make a Frankenstein's monster of a remix using Trimble Sketchup. Added a shortened version of Brooklyn Tony's Aeon Pro X folding stock with two length options. It came out better than expected so I present my 2 day project to make the Pro Sender less ugly.
EDIT 11-30-25: After further testing, the barrel is too long/tight for the darts to fly accurately. I've edited several springer files but never a flywheel blaster. I've adapted the files to expand the barrel to allow the darts to remain accurate
Basic assembly instructions at:
Atlas SRS Hand Guard for the xShot MPP
https://makerworld.com/en/models/1844886-atlas-srs-hand-guard-for-the-xshot-mpp#profileId-1971405
It'll friction fit pretty tight but needs the following to make it right:
5 Heat Inserts: M3x6x4.2
5 M3x12mm screws (cap head preferred)
Folding stock instructions and parts are the same as the folding stock in this kit:
APX-24 DMR Kit for the Adventure Force Aeon Pro X
https://www.printables.com/model/911946-apx-24-dmr-kit-for-the-adventure-force-aeon-pro-x
M3 Hex Nut | 5 |
M5 Hex Nut | 1 |
Other:
Part Description: | Quantity: |
|---|---|
8mm Diameter Compression Spring (Must be less than 5mm thick when fully compressed) | 1 |
Zero Degree BCAR barrel option:
