Counting matching models…
This is a bullpup kit for the PLR-16 gbbr by WE-Tech. I ended up with a PLR-16 in my possession a few years ago, and it didn't see much use because of how bizarre and unwieldy it is. I decided to make this kit to turn it into a much more…
This is a redesigned kit from AKHTO-DESIGNS bullpup ar15 kit https://cults3d.com/en/3d-model/game/ar15-bullpup-kit-beta-gbbr-version-highrise that brings in more customizability to the overall appearance. Most bullpup kits only support…
The Twister is a 3d printed bullpup Nerf blaster that is operated by compressed air from paintball air tank bottles! It can be configured for semi auto, 3 round burst, and full auto. The Twister is powered by Roboman's Cosmic Nomad HPA…
This is the Shrew! Rush, but the “sh” is in front of the “ru”. It's an 80mm draw pump action using straight Talon magazines. It's got a very nice trigger, PCAR or SCAR built in, quick swap spring cap, and is quite rigid due to dovetail…
A custom HPA airsoft rifle that uses M4 magazines. I designed this to be comfortable, short, and light. I am told it is akin to a P90, however the Magpul PDR-C is far closer in design to this gun. I also made this gun capable of fitting…
Updates : 8/1/2024: Posted Mk2v1 10/13/2024: Added extended Nosecone coupler for a more secure fit Introduction: The 3-in Bullpup is an upscaled version of my Bullpup - Extreme Series rockets. It incorporates a tailcone motor retainer and…
Print orientations: For the parts that I have not changed follow Sillybutts print recommendations. For the Parts that I have added, I will show the print orientations I recommend and also my recommended settings. First up is the stock I…
This is the FLP-03, a Flycore based Nerf blaster. It uses straight Talon magazines, and is compatible with Hurricane wheels (and I believe FTW wheels, but have not tested). The battery box is approximately 30mmx30mmx100mm. You will need:…
Vanishing Point Have you seen the Parallax and though "wow thats cool but why is there a slide on it". I thought the same thing, and changed it. Behold! The Vanishing Point. A very compact (15.5in from stock to barrel tip) bullpup...…
Introduction : The Extreme Series of Builders Kits were designed to print, assemble, and fly easily. These rockets can be flown on lower-powered motors in a park, or with higher-powered 24/29mm motors. Typically, an Estes F15 can loft…
My first pump action primary class nerf blaster. Probably best with the 34 round magazines. Great for competition or plinking. Integrated SBCAR is ideal for hitting whatever you're pointing it at. High and low power options available.…
The Nerf Tactical Jolt Cover Kit is another model to make the best Nerf blaster even more tactical. I originally designed it to fit with Crinye's bullpup trigger mod ( https://www.thingiverse.com/thing:3994539 ) for the Jolt. However, you…
Build guide and documentation Typhoon is designed to be a super short bullpup to minimize the total length of the blaster while still remaining shoulderable. It is designed around high concavity brushed flywheels, specifically the Fuijin…
🔫 Bullpup Shotgun – 3D Printed Tactical Short-Frame Shotgun Replica Bring modern firepower to your 3D printed arsenal with this Bullpup Shotgun model — a compact, futuristic shotgun design where the action and magazine are located behind…
Uses 4-40 screws for the grip 21 Amp switch for the trigger M3 screws and heatsets for the mlok on the grip and the butt stock 1 toy screw for the mag release to pivot on. Head just has to be small enough to fit in the hole for the mag…
Inspired by a 30 Minute Mission weapon, made the weapon with Microsoft 3D builder and Blender. Added the dummy13 compatible grip.
Changelog: 7-22-21 8:17PM EST: Fixed sear STL position to be flat. Changelog: 7-30-21 4:08PM EST: Updated the Pinnedarm to v2, which is fully printed (instead of using a piece of screwed in PVC on the tip of the arm) After 4 months of…
Edit 12-9-20: Added new mag fronts that match the new TCB look. Added a left handed variant. Old files have the OLD prefix on it. Parts that make the talon claw bullpup have better grip ergo. Cuts out parts of the magwell and the…
A collaborative attempt to find and remix the prototype XENOS into a functional blaster. notes for building- The SHIDDLE MID requires 8 4-40 standoffs. Putting in these standoffs is kinda tricky, I would use a finger in the middle to make…
This is a set of models, minus one piece noted in the instructions, for a minimal cutting body modification kit for the Adventure Force Commandfire by Dart Zone. Print instructions Forward I am not the most advanced 3d printer user. I…
Changelog: 7-22-21 8:17PM EST: Fixed sear STL position to be flat. Changelog: 7-30-21 4:08PM EST: Updated the Pinnedarm to v2, which is fully printed (instead of using a piece of screwed in PVC on the tip of the arm) After 4 months of…
Take any barrel shroud for your beloved MPP and make it into your own cursed bullpup! It requires two M3x10mm screws, but outside of the wiring, it re-uses the spring on the pull mag release (since you won't be using it anymore,) you can…
Made more room for your finger on the trigger.
If it ain’t broke, why fix it? Well, there was a little fixing... The TC4U-B reintroduces the bullpup Talonclaw, now using Caliburn V4 bars instead of the V3 bars. Modern bars means modern 2 part rambase too. Blaster is otherwise largely…
Just a remix to add some flair to the sides of the kit as requested by a friend.
Threaded rod bullpup: the Hound There hasn’t been a bullpup blaster made with threaded rods because threaded rods couldn’t allow for the same kind of clearance as other materials, like U-channels or flatbars. The B-TCU, for example, uses…
The original one digs into my face when shouldering so i made this.
This model is designed to improve comfort when using bullpup kits on the X-Shot Motorized Piston Pump AEB. It adds a smooth cheek rest that covers the picatinny rail, and relocates the T-pull charging handle to right above the magwell.…
This is an accessory I created using TinkerCad and Adobe Illustrator. It's multi-part like a model kit so it's easier to print and allows you to print it in multi colors if you want. I use TinkerCad for my 3D printable files simply…
Solved the rubbing and extra friction caused by the pump bending from the torque. Minimal hardware, no bearing required, smoother than expected (trust me). Hardware needed: 2x M3x16 button head cap screws 2x M3 nuts Loctite Support is…
This remix uses silly collet at the front and normal barrel screw at the back to fix the barrel. Main section printed in 2 halves, connected with threaded rod tension and 2x 2mm locating pins up to 18mm in length, there is another 6mm pin…
Remix of ebay sled that screws in the nose cone of Froglicker's 3 inch Bull Pup that mounts an Eggtimer Quasar & battery. Two battery boxes are provided to fit either 450 mah or 900 mah batteries. Mount holes for Quasar and battery box…
🔫 Bullpup Shotgun – 3D Printed Tactical Short-Frame Shotgun Replica Bring modern firepower to your 3D printed arsenal with this Bullpup Shotgun model — a compact, futuristic shotgun design where the action and magazine are located behind…
Build guide and documentation Typhoon is designed to be a super short bullpup to minimize the total length of the blaster while still remaining shoulderable. It is designed around high concavity brushed flywheels, specifically the Fuijin…
Updates : 8/1/2024: Posted Mk2v1 10/13/2024: Added extended Nosecone coupler for a more secure fit Introduction: The 3-in Bullpup is an upscaled version of my Bullpup - Extreme Series rockets. It incorporates a tailcone motor retainer and…
A more complex assembly than the old hush, but way more reliable, easier to print, and fitting for smaller printers (180mm³), this thing is basically all my experience with stringers condensed into the old formfactor of the hush. Needs…
Note: the mags in the glamour shots are not included, find the files for those here This thing is similar to a lynx but was built from the ground up You can get a set of string and the correct orings from OOD Overview: Optional Internal…
