Catfish | Bullpup Foam Blaster

Note: the mags in the glamour shots are not included, find the files for those here

This thing is similar to a lynx but was built from the ground up

You can get a set of string and the correct orings from OOD

Overview:

• Optional Internal BCAR as an accuracy boost

• Coupled barrels for better performance despite small print profile

• Sturdy build (Can be even more sturdy if you print the internal bars out of material that doesnt creep)

• Can slamfire

• Picatinny rail under the pumpgrip

• Skinny pusher so you can change mags while in battery

Printing and hardware:

• 180mm³ Printer required, you may have to angle long parts by 45° on your buildplate

• Print settings are labeled on their respective folders. No supports needed

• 4mm elastic string required (this stuff) (5/32" will work too)

• needs straight worker talon mags example US example EU or printed equivalent (Thanlon, Superdrum etc.)

• Filament use for a stock blaster (Sliced in a fork of Orcaslicer with my recommended settings and gyroid infill)

  Color	Amount
  ColorA (Frame)	576,53g
  ColorB (Grips/Furniture)	360,57g
  ColorC (Orange)	370,36g

• Optional Hardware:

  Part	Amount
  #012 Oring (Pusher)	1
  #016 Oring (Barrel Coupler Seal)	1
  #123 Oring (Plunger Seal)	2

Showoff:

Assembly guide: