Samsung Q990F Subwoofer Cover - Extended Clearance
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protective cover for Samsung Q990F based on @aballacchi_1376836 design
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 230
- Wydruki
- 0
- Wyświetlenia
- 803
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
Protective cover for Samsung Q990F based on @aballacchi_1376836 design.
The original file has about 5mm of clearance from the subwoofer cone surround in its natural position. I wanted to use up some PETG I had lying around, which has the tendency to be quite flexible on thin faces. The original design flexed very close to the surround, if not touched it, especially when the bass was strong. I have increased this clearance to 8mm on this remix, this should give adequate clearance for when/if the cone needs a lot of travel and the cover is pushed (or impacted) by some object.
Print in PC, Nylon or PETG with the hex pattern face down on the build plate. No supports required.