"Oyster" 5-to-1 Filament Hub with Sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fine-tuned for smooth and reliable filament feeding.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 600
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I tried so many different filament hubs that just didn't work - didn't feed well, put too much friction on the filament, would catch the tip, etc etc - so I designed my own. Big thanks to Gcode Gearhead and Talon in the EX3D discord server for their consultation on the filament path.
Requires 5x ECAS-04 fittings, a D2F microswitch with lever, and a 5mm bearing ball. You'll need to trim about 2mm off the end of the microswitch lever.
(I've printed and tested, feeds great, just haven't taken any pictures yet. I'll update the page once I do.)