Adimlab Gantry-S Direct drive mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for Dragon or Mosquito hotend, with Sherpa mini, Orbiter 1.5 or Orbiter 2.0
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 491
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This direct drive mount attaches to the stock X carriage of the Adimlab Gantry-S (may also fit other Adimlab printers) and allows the use of either Phaetus dragon or Slice engineering Mosquito hotends with either Sherpa mini, Orbiter 1.5, or Orbiter 2.0 extruders.
It also uses a single 5015 blower fan part cooling duct, and a 40mm heatsink fan, rather than the 4010 blowers and 40mm heatsink fans shipped with the printer.
Please download the file appropriate for your choice of hotend and extruder.
This model is designed to use 4 M3 threaded inserts, 2 for the upper carriage mount and 2 for the extruder mount.
Ideal printing orientation is on it's back with the heatsink cooling duct facing up.
Update 12/03/22: Adjusted extruder mount surface height to allow clearance of heatsink fan duct by motor
Update 13/3/22: Added BLtouch mount
Update 21/3/22: Swapped heatsink duct to allow use of Mellow NF crazy style clones with mosquito version