Liczymy pasujące modele…
This is a linear rail mounting system for the Adimlab Gantry-S printer. This uses the Adimlab x carriage plate so you can keep the original hotend if desired. Use a 300mm MGN12H linear rail. You may also need a new belt. An x-axis belt…
A 3D model of the Adimlab 3D printer to use for prototyping of modification designs. The STL is a placeholder. The 3D model is included in .obj, .dxf, & .3mf format. Some parts are missing and yet to be modeled but can be used as-is for…
X_Belt - allows use of stock belt & mounting screws but will allow easy tension adjustment of the X axis belt - printed with 3 perimeters, .2 layer PLA (Updated 01-09-2019) - better belt locking, more adjustment PM-C07_Z_bracket - has…
This control box could be used with other printer's with some mods for the control board hole positions and the LCD panel to make it fit. This is a well ventilated control box to fit both the LCD panel and the PCB board, but not the power…
This is an enclosure for the Robin Lite and the MKS Nano for the Adimlab Gantry-S printer. This will fit in the stock location and offers improved cooling ability and room for the board. Category: 3D Printer Parts
A model of the x carriage plate of the Adimlab Gantry-S printer.
Filament guide for Adimlab printer or other printer's that use the Mk8 extruder. This was not designed by me. I'm posting this here as a convenient place to download for others. Category: 3D Printer Parts
This is a remix of CR-10 Y-Axis Belt Tensioner Remix" by skartz. I changed as little as possible as I really liked the design. The things I did change were to make this work on the Gantry-S As it turns out I had to change a bit more than…
This is a remix of the original FB Group Adimlab Gantry printer X-axis belt tensioner. This improved version thickens the base and top and adds a second triangular brace on each side for improved stiffness. The pulley housing area is…
Description: This is a new bracket and belt holder to mount the OEM Y Carriage for the Adimlab printer. It is based on designs by a member of the Adimlab Facebook Group. This design is a little different from that design in that it uses…
I love my Adimlab 3D printer but always hated the external box. These mods move the PSU to the back of the printer frame and the MKS board to under the printer bed. It also puts the lcd in a mount on the front. There are holes to mount…
This direct drive mount attaches to the stock X carriage of the Adimlab Gantry-S (may also fit other Adimlab printers) and allows the use of either Phaetus dragon or Slice engineering Mosquito hotends with either Sherpa mini, Orbiter 1.5,…
BL Touch for the AdimLab Gantry with the extruder in the photo. It replaces one of the LED strip mounts at the bottom of the extruder. I have tested the model that works with the Volcano Hotend. The Shorter one (untested) can be used with…
Replacement bracket for the Adimlab printer Y stepper motor. The factory bracket is thin and tends to bend easily. Some folks have even had the mount crack. Use one of the holes on the top side in one of the original spots to put the…
An additional mount bracket for the Z motors on the Adimlab Gantry printer. Hardware: 2 M3 x 12 screws for the motor 2 M4 x 8 screws to mount on the 2020 extrusion 2 M4 t-nuts Install: Put M3 screws in Put on motor and start M3 screws…
Center Mount LCD Case for newer "white board" ADIMLab Gantry machines. Probably does not fit older "black board" machines, but don't have one to test. This case is useful when you desire to locate your LCD screen in the middle of the…
This is a remix of "ADIMLab Z-Axis End Stop Adjustment" by Rabbit1210 to adapt it for the Adimlab Gantry-S 3D printer. Remove the factory bracket and the z stop from the bracket. For the knob, you will need an M3 x 40 screw, one M3 nut,…
A simple box to use to turn on the printer. Made to mount on the side of the 2020 extrusion. This uses the Adimlab printer switch that came with the printer. This is a nice for folks who put their printer up on taller legs. Print as…
Remixed rear plates to allow the use of kevinakasam's ender 3 belt driven Z conversion with Adimlabs Gantry-s (and possibly Gantry pro) printers. As my printer is running a direct drive setup, I didn't include an extruder mount on either…
This is a E3d V6 mount for the Adimlab pinter which still keeps it compatible with the Cobra Cooler. This mount uses 2 - M4x20 nuts and bolts to attached to the carriage, 1 - M4x25 for attaching the extruder, and 1 - M3x10 for securing…
This is a remix of the 40mm fan version of the Adimlab Killer Cobra Kooler ( https://www.thingiverse.com/thing:3315784 ). The fans needed for this should be 40mm x 40mm x 10mm. 20mm thick fans will not work without further modifications.…
This is an upgrade for HCMaker 7 3d-printer. With tennis ball feet it is possible to place all electronics under the table. So here are mount brackets for PSU. Print two of each. You also need 4pcs t-nuts (M3 or M4) and 4pcs screws 8mm…
Made these to cover up the V-Slots to keep dust, dirt, filament and anything else out of the V-Slots. This is customized to fit the base of the Gantry-S. I used the smallest size from the source thing and they fit well. Here are the…
This is a new version of the Adimlab Gantry-S adjustable Z-Stop with gears for the adjustment. Please see https://www.thingiverse.com/thing:4240240 for installation instructions. Category: 3D Printer Parts
The Y stepper motor metal bracket on the Adimlab i3 printer is very thin metal and it could bend easily. I also don't like how it is mounted only on the top of the 2020 extrusion which lends itself to come loose. This is designed to be…
This is a remix of the 90 degree 2020 Filament Guide by Evan VW. I made the loop a little thicker and added a small hump to allow for the Adimlab 2020 plastic trim that is on the extrusion. Update: Increased the scale by 2% as Evan VW…
The Adimlab Z lead screw bearing support has been remixed. This new version is called "AL_Quiet_Z_V4.STL". The original Adimlab metal brackets allow the z lead screws to move as they should , but they tap against the metal which is…
Just a simple UBL bracket for the Adimlab. Print Settings Printer: Adimlab Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: Solutech PLA Black Notes: Nothing really special needed on this, just print and mount. Category: 3D…
This is a cover for the X Axis Limit Switch. It snaps in place so there's no hardware needed and no need to remove the switch. It's a tight fit, but it goes on. Hook the top first and push the bottom until it snaps. You can also slide it…
This is a cover for the X-Axis pulley located on the left side of the ADIMLab Gantry printer and attaches to the motor mounting plate with two M3x20 or M3x25 machine bolts. I recommend using nyloc nuts since there's a lot of vibration…
Slight Remix to make it height Adjustable. I used it on my Adimlab Gantry with an E3D v6 hotend. Tinkercad link: https://www.tinkercad.com/things/7dTHienanYc Print Settings Resolution: 0.28 Category: 3D Printer Parts
This is a 40mm fan grill cover for the ADIMlabs i3 printer. The bottom edge is cutoff of the remixed "40mm Fan Clip-On Guard/Grill" thing so it will fit on the ADIMlab printer. It just slides on and yakulis did a great job designing this…
This is a BMG extruder and E3D V6 hotend mount for the Adimlab Pro printer. This uses the backplate that comes with the printer so there is no modification needed there. If you want to add this mod to an Adimlab Printer with linear rails…
Over time I have collected several parts for the Adimlab i3 Gantry printer. Here is a cover for the extruder with a mount for a auto leveling sensor built into it. Category: 3D Printer Parts
This is a remix of: Petsfang Direct for E3D Titan Direct Extruder for Micro Swiss/ E3Dv6/ or Stock CR10 & Tevo Tornado hot ends. The files are on Thingiverse at: https://www.thingiverse.com/thing:2907538/files This remix adapts the…
This is a bracket to mount a dual drive BMG extruder on the existing carriage for the large adimlab printer Print Settings Printer: Adimlab Rafts: No Supports: No Resolution: 0.2 Infill: 30 Filament: Solutech PLA Black Notes: This bracket…
This is a two-piece cover for the ADIMLab Gantry extruder circuit that sits above the extruder motor. If you have removed the original carriage housing, the extruder board is left exposed and subject to damage. This cover will help to…
This is the part cooler and radiator cooler for the dual driver extruder with all metal E3D V6 hotend. Print Settings Printer: Adimlab Rafts: No Supports: Yes Resolution: 0.2 Filament: Solutech PLA Black Notes: Use tree supports in CURA…
This is a setup done by and information provided by Joshua Waite that I am uploading with his permission. This setup will convert the adimlab dual z to a single z. Print Settings Printer: Adimlab Rafts: No Supports: Yes Resolution: 0.2…
This is a remix of cmelson's Adimlab modifications parts cooler so it will mount from behind with magnets like the popular cobra cooler does. The heatsink duct is a very slight remix of "E3D V6 Fan Duct for MendelMax standard X Carriage".…
This is a remix of the very good "ADIMLab Control Box Front Panel" by FerretWorx." This remix adds the SD card slot; adds a flat front instead of ending at a point and makes the logo a little more pronounced along with some other minor…
I print a lot of PETG. I don't have an enclosure and a 5015 blower fan can easily cause parts to warp. The original fan caused parts to warp on the right side of my prints as the majority of the cool air blows there. I made a fan duct…
A spacer to line up the stock Adimlab Gantry-S filament detector with a WINSINN dual gear extruder. Category: 3D Printer Parts
This is a new spool holder made to fit on top of the Adimlab control box. It is remixed from "Updated Creality CR-10 Bearing Filament Spool Holder (V7)" https://www.thingiverse.com/thing:2440814 . It looks like a brilliant design and I…
Updated version with improved heatsink duct and part cooling duct. Part cooling mount now also uses heat-set thread insert rather than a free nut.
A drink coaster with the Adimlab Printer logo on it (or use to give your printer a little love) ! For anybody that wants the logo I also included the STL file for it. FYI the make showing the thing on an Adimlab printer was scaled to 50%.…
This is the original X Tensioner design. Recommend you go to the new improved design with stouter bracing and a thicker pulley. https://www.thingiverse.com/thing:3625832 This is a design by Karl from the Adimlab Facebook page. When I made…
This is an auto-leveling sensor mount for the Adimlab i3 Gantry printer. This mount is for inductive or capacitive type sensors of various sizes. This is an "open" design instead of covering up the whole extruder head like the Adimlab…
PSU Mount is 116mm by 52mm, Switch Hole is 30 by 22, Power in is 28 by 21 with the hole spacing 40mm apart.
My remix of PSU cover from Adimlab modifications. This will also fit many other PSU's that are 50mm in height: https://www.thingiverse.com/thing:3363632 The front of the cover has a lid you can remove to get to the PSU terminals easier.…
A sign to showoff the Adimlab logo and give your printer some recognition! The Gcode with the M600 command so you can change the filament color is included. Print Settings Printer: Adimlab i3 Gantry Rafts: No Supports: No Resolution: 0.2…
My first 3d Printer was an ADIMLab Gantry-S. One of the stepper controllers on the original motherboard failed, so I bought a BIGTREETECH SKR V1.4 Turbo motherboard and a BIGTREETECH TFT35 E3 screen to replace it and the original screen.…
Based off of Garrett Waltrip's idea posted on the Adimlab Facebook group. You can use this to have a (relatively) quick disconnect of the e3d hotend and also mount the gold mk8 extruder that's a popular upgrade for these printers. I've…
These are some feet that are designed to fit over the feet that come with a 3D printer. I made these specifically for the Adimlab Gantry-S printer, but they should easily fit on many printers on the market. They have two parts. A top and…
This is a remix to make this part compatible with the older black board Adimlab gantry printers. UPDATE: 8/28/19 made some minor fixes to the model. Printing a test model in progress. Category: 3D Printer Parts
This is a bracket to put on the top of the extruder assembly so that cable chain and fan wires can be zip tied on the Adimlab printer. Uses two 3mm x 8 scews and two 3mm nuts. You will need to remove the cable chain put this bracket on…
This is a Y stepper bracket for a 2nd damper that can be added along with my Adimlab Y stepper mount https://www.thingiverse.com/thing:3127999 . This thing should also work with the original Adimlab bracket. Either way its function is to…
A new front plate for the electronics box of the Adimlab Gantry. I added two 4010 fan mount points to the front. Uses the 4 stock mounting screws and nuts to mount the new front plate. There's also a 'slotted' version. It is originally…
This is a spool hub I remixed to fit my Adimlab i3 printer. The Adimlab i3 Gantry printer older version came with its own filament holder and I remixed the Quick Change Universal Spool Holder by making the center hole of the hub larger.…
This is a mount adapter to add a BMG style extruder and an E3D V6 style hotend to an Adimlab printer with linear rails. This only includes the linear rail adapter and the backplate. Click on the following link to get the rest of the files…
This is a remix of "Bondtech BMG on a Taz 4 (or Taz 3-5--needs slight mod for Taz 6)" by jaln". I like how the design is fairly simple, the parts cooler air duct is integrated and the visibility of the printhead is good. If you want this…
This is a remix of the "ADIMLab Z-Axis End Stop Adjustment" by Rabbit1210. What this remix does is add a couple of gears and a turn wheel that replace the original adjustment knob. The aim is to make adjustment easier and the parts more…
This is a remix of CR-10 X-Axis Tensioner" by donnyb99. I didn't change that much, I really liked the design and the things I changed were mainly just to make this work on the Adimlab Gantry-S printer. The main thing I remixed was to add…
This is an E3D V6 hotend mount, along with a fan mount and air ducts for the Adimlab Gantry-S 3D printer. The heatsink air duct used is the blue one that comes with an E3D hotend. This setup works with the OEM fans, thermistor & heater.…
This is a Y axis belt tensioner bracket and pulley that somebody on the Adimlab Facebook group made a while back. Hardware; Use the original hardware that came with the printer Y axis tensioner. For the adjustment screw if the original…
Final part for my "no-box" upgrade. requires 2pcs M3*8mm and 2pcs M3 t-nuts (or printed t-nuts https://www.thingiverse.com/thing:3050607 ). Printed front side down with PLA. Supports needed. Check out my other designs in HCMaker7…
This is a modification to the Adimlab Gantry-S printer to add a top-mounted linear rail to the x-axis. Besides 3D printed parts, this mod will require an aluminum extrusion from Misumi, an MGN12H 300mm linear rail, and a Creality x…
This is a linear rail mod for the Adimlab Gantry Printer. This can be adapted to other printers. This mod requires a few parts and hardware: A Creality type x gantry carriage with wheels removed An MGN12H linear rail 400mm in length Some…
The Adimlab Gantry printer is a clone of the Creality CR-10. The X carriage on the Adimlab printer is a proprietary design and it is difficult to work with. If the printer is modified and a Creality style X carriage plate is installed on…
