ADIMLab Center Mount LCD Case for Newer Machines
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Center Mount LCD Case for newer "white board" ADIMLab Gantry machines. Probably does not fit older "black board"…
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 183
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Center Mount LCD Case for newer "white board" ADIMLab Gantry machines. Probably does not fit older "black board" machines, but don't have one to test.
This case is useful when you desire to locate your LCD screen in the middle of the front rail. It features a notch that is large enough to accommodate the Y-Axis tensioner. This case does not have a back panel which makes it easier to attach/detach the ribbon cable.
Use M4x8mm machine bolts w/v-slot hammerhead nuts for mounting.
This case was modeled completely using Tekla Structures and was inspired by cmelson's LCD case (https://www.thingiverse.com/thing:3363632)
Print Settings
Printer:
ADIMLab Gantry
Rafts:
Doesn't Matter
Yes
Notes:
Best to print face down. May need supports for mounting "ears".
Category: 3D Printer Parts