ADIMLab X Axis Limit Switch Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover for the X Axis Limit Switch. It snaps in place so there's no hardware needed and no need to remove the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a cover for the X Axis Limit Switch. It snaps in place so there's no hardware needed and no need to remove the switch. It's a tight fit, but it goes on. Hook the top first and push the bottom until it snaps. You can also slide it on from the connector side. Make sure to position it so it doesn't interfere with the switch operation.
This cover also works on the Z Axis Limit Switch as well. However, with that, you might want to drill a small hole (about 1mm) on the side of the cover to allow the LED to be more visible. This cover does not work with the Y Axis Limit Switch.
Fully compatible with the ADIMLab X-Axis Pulley Cover
I show this cover (and other covers) in a YouTube video: https://youtu.be/JcyTnS-7tlk
Category: 3D Printer Parts