ADIMLab X-Axis Pulley Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover for the X-Axis pulley located on the left side of the ADIMLab Gantry printer and attaches to the motor…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a cover for the X-Axis pulley located on the left side of the ADIMLab Gantry printer and attaches to the motor mounting plate with two M3x20 or M3x25 machine bolts. I recommend using nyloc nuts since there's a lot of vibration from the X axis motor, but that's not totally necessary.
There are recesses for the bolt heads that will be unsupported, but I found it easier to clean out the unsupported material than the support material. I'll leave that up to you.
I show this cover (and other covers) in a YouTube video: https://youtu.be/JcyTnS-7tlk
Print Settings
Printer:
ADIMLab Gantry
Rafts:
No
No
Resolution:
0.1 to 0.2mm layers
5-10%
Category: 3D Printer Parts