Adimlab X Tensioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the original X Tensioner design. Recommend you go to the new improved design with stouter bracing and a…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is the original X Tensioner design. Recommend you go to the new improved design with stouter bracing and a thicker pulley. https://www.thingiverse.com/thing:3625832
This is a design by Karl from the Adimlab Facebook page. When I made mine I used a different screw for the idler part so I am posting this here if anybody wants to use it.
This is an X-axis belt tensioner. The Adimlab i3 Gantry printer comes with a Y-axis belt tensioner and with this mod you will be able to adjust the X-axis belt much easier than the stock slotted bolts on the X stepper mount.
Also included in the files is Karl's instructions on how to install this part.
Print Settings
Notes:
Recommend to print with 3 walls and infill of 50% or higher
Category: 3D Printer Parts