Devil horns on a peaked cap(hat)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You'll make a devil of yourself in no time!
- Ocena
- 0 / 5
- Polubienia
- 110
- Pobrania
- 212
- Wydruki
- 0
- Wyświetlenia
- 1200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Make a devil out of yourself! I created several types of devil horns to attach to a peaked cap. There are two versions - straight and curved. For the inner part (in the cap) it would be more appropriate to use TPU.
There are four mounting methods:
A - just a 2.6mm hole for the screw
B - during printing, stop before finishing the hole for the M3 nut with a nylon insert, insert it and continue printing
C - during printing, stop before finishing the hole for the M3 nut, insert it and continue printing
D - hole for the M3 threaded insert
Needed parts:
- M3x10 (max. M3x20) countersunk screw
- M3 threaded insert 5x5mm or 5x4mm
Assembly:
- seal the inserts (or use another method A, B, C)
- screw the cap on both sides into the ventilation holes
- use force to tighten the screw
Please give a HEART for the download! We like to collect them. ;-)
PRINT SETTINGS:
Total time → 1 Hour
Number of print files → 4 (one cap)
Layer height → 0,2
Layer width → 0,4
Perimeters → 3
Infill → 20 %
Material → PETG, PLA, TPU
Total weight → 12 g
Support type → no