NODESTACK - DELTA PACK
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Third element of NODESTACK - 1020 Tilt bin and 1010 D1 Drawers presented by SMACKMAX
- Ocena
- 0 / 5
- Polubienia
- 37
- Wydruki
- 0
- Wyświetlenia
- 1296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
NODESTACK - DELTA PACK
Third element in the evolving NODESTACK system.
Interested to see more of my projects?
https://linktr.ee/smackmax
Part of my own lab, iterating versions as i go along. In this release are the following files:
- 1010 CUBE D1
- 1010 DRAWER D1 (Needs support - print in orientation as used)
- 1010 DRAWER CARD
- 1020 CUBE (best to print with support, flat side to the build plate)
- 1020 Tilt Bin (Needs support - Slides into place with the nothes in 1020 CUBE file)
- 1020 Tilt bin deco PANELS (Friction fit - if loose use glue)
For other parts of the system :https://www.printables.com/model/1380647-nodestack-base-pack
SYSTEM NOTES:
*Builds in 100 x 100 mm grid
*Make sure to test fit your pegs before printing all of them (different filament might need different tolerances - multiple files includes to test fit - switching orientation can help)
*JANKER file is avaible to give more grip when pulling (squeeze & pull)
*The hooks on the back are there incase i need them in the future
*Glue can be used to permanently lock them in place
*Uses a bunch of filament
*Test fitment on components is recommended
*I might improve the connection system