A321 Rudder Trim Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A321 Rudder Trim Panel
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This panel is for trimming the rudder depending on load, wind…
Assembling should be straight forwar and the logic is done by Mobiflight.
You'll need four M2 screws with nuts to fix the Reset Button and the Trim Button to the front plate.
As Reset Button take a typical 6x6x5mm tactile switch and for the Lever a small Rocket Switch.
Update July 18th, 2026
Replaced the front panel with an 3MF-File which was created in Bambu Studio.
The height of the letters were reduced and the 3MF-profile is ready for multi material printing.
If you need the STL open it either in Bambu Studio or https://3dviewer.net/ and export it from there.