A321 Rudder Trim Panel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A321 Rudder Trim Panel
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This panel is for trimming the rudder depending on load, wind…
Assembling should be straight forwar and the logic is done by Mobiflight.
You'll need four M2 screws with nuts to fix the Reset Button and the Trim Button to the front plate.
As Reset Button take a typical 6x6x5mm tactile switch and for the Lever a small Rocket Switch.
Update July 18th, 2026
Replaced the front panel with an 3MF-File which was created in Bambu Studio.
The height of the letters were reduced and the 3MF-profile is ready for multi material printing.
If you need the STL open it either in Bambu Studio or https://3dviewer.net/ and export it from there.