Universal RC plane canopy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
my rc plane (superfly incase you were wondering) had a foam canopy which was really fragile so i designed this. i…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
my rc plane (superfly incase you were wondering) had a foam canopy which was really fragile so i designed this. i designed it so it can be used on many different planes its uses zip ties to go through the foam into the printed rim on the other side
i haven't designed a way to secure the lid on but my plan is to use velcro straps and a zip tie as a hinge, at the moment the lid clips in using a piece of a gift card as a stop, its not too strong though so ill add velcro later
to hold the battery in i just use a piece of foam cut to the shape
the canopy hasn't got any tolerances designed so trim it down in software or sand the edges after you print it the dimensions are 101 x 40.5 x 170.4 mm
added a solid plate for soft foam planes added a hook to the solid plate for bungee launches
the holes arent symmetrical (the front one isnt for sure, not sure about the others)
Print Settings
Printer Brand:
RepRap
Printer:
prusa i3
Rafts:
No
Supports:
Yes
Resolution:
0.4mm
Infill:
100
Notes:
i used colorfabb pla
220c
60c bed
100% fan speed (not on the main body which was a mistake)
print the lid vertically so you dont need supports
Category: R/C Vehicles