1 / 6
Adapter for S14D lamp socket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
S14D socket adapter to fix with only one screw.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Typically S14D sockets are secured with two screws. I only was able to drill one hole in the middle. This is an adapter to make it possible to attach a S14D socket to a single screw hole. I designed the adapter as flat as possible while keeping it sturdy. Also, there are two version depending whether only the white (inner) part is used or the outer shell as well. If you have questions, please post them in the comments section.
Print instructions
- No support
- I used 25% of Gyroid infill
- I also added 100% infill to the middle part for extra stability (see pictures)
- Print in PETG
- I used 2 mm layer height
License
- You must give appropriate credit
- If you remix you must distribute under the same license: Creative Commons — Attribution — Share Alike