1 / 2
X-Shot Claw Hunter/Eliminator Dual Shot Enabler — zdjęcie 1
1 / 2

X-Shot Claw Hunter/Eliminator Dual Shot Enabler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small connector to attach the barrels to the plunger tube after removing the rotating barrel alternator in the…

Ocena
0 / 5
Polubienia
5
Pobrania
27
Wydruki
0
Wyświetlenia
553
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution

A small connector to attach the barrels to the plunger tube after removing the rotating barrel alternator in the X-Shot Bug Attack Eliminator/Dino Strike Claw Hunter (they share the same internals, even though the shells are built very differently). They should slide snugly on, but if you can always add a little bit of tape on the barrel/plunger tube if you need a tighter fit.

It shouldn't need any supports if you print it in the supplied orientation, but might need some build plate adhesion (brim and/or hairspray).

 

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

No

Resolution:

0.20 mm

Infill: 

Doesn't matter

Filament Brand: 

Random cheap spool I had lying around

Filament Color:

Red

Filament Material:

PLA 

Tagi