1 / 5
Parametric Wemos D1 Mini Case — zdjęcie 1
1 / 5

Parametric Wemos D1 Mini Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of FoxPrint3D’s Wemos D1 Mini case with parametric design and all ports accessible.

Ocena
0 / 5
Polubienia
4
Pobrania
24
Wydruki
0
Wyświetlenia
99
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
Motivation

I used FoxPrint3D’s design for years, but the USB port was not quite aligned with the Wemos D1 Mini boards I usually purchase. I also thought the design could use some other features and adjustments.

Solution

(Re)Design and print a custom mount that achieves the following objectives:

  • Fully parametric providing customization of all dimensions
  • Same snug fit and toolless assembly as the FoxPrint3D design
  • A port centered on all user accessible features (or easily adjusted using the Fusion file)
    • USB Port
    • LED indicator
    • Reset button
    • Header pins and labels
  • Two tops
    • Closed – Only user accessible features have openings (i.e., header pins and labels, and the LED indicator)
    • Open – Same as closed but also fully displays the WiFi chip and allows for the top to be 2 mm shorter than the Closed top
  • Minimal material usage
  • Supports not required
Design

The design is for these Wemos D1 Mini boards. Others will likely fit, but the ports may need some adjustment (see Customization).

Customization

The Fusion file is included.

If you cannot get Fusion to work for you, please send me a message (see below) and I will post your requested model files at my earliest convenience.

Materials
  • (1) Wemos D1 Mini board
    • These are the boards this design is based on
Printing

See the attached .3mf for my settings and model orientation (no supports required). Both tops are included, so choose one and disable the other one.

I prototyped on a Prusa CORE One.

Post-Processing

Maybe try assembling/disassembling the case a few times before inserting the card to clear out any stray plastic.

Questions

Please let me know if you have any questions (Messenger | Printables.com).

Shameless Plug

If this model helped you solve a problem, save some time, or in any way made your life a little easier then please consider clicking the Like button and posting your Makes! If it fell short after clicking on the title of the model, please let me know (Messenger | Printables.com). Either way, Thank you.

Tagi